KTM1000 Fékdob- és Féktárcsa esztergagép

The Automec KTM1000 Brake Drum and Brake Disc Lathe Machine, backed by Osm Automotive Ltd. Co., is designed for lathing discs with diameters ranging from 150 to 330 mm, as well as drums of passenger cars, light commercial vehicles, and minibuses.

Disc and drum lathe is a method used to address deformations that occur over time, solve vibration problems in the brake system, or resolve issues with contamination or vibration in newly replaced discs and pads. This way, you can achieve a surface on a new drum or disc that is comparable to a newly manufactured one. This way, you can achieve a smooth surface similar to that of a new disc. It helps to reduce the vehicle owner’s costs and improve customer satisfaction by providing high-quality and safe service. Users should be mindful that discs should not be reduced below the minimum thickness specified by the manufacturer’s standards.

The machine allows for the grinding of both discs and drums on the same shaft, which has a thickness of 25 mm. The disc lathe attachment can be easily mounted and dismounted with a single screw. When performing drum lathe operations, the disc lathe tool is removed, and the drum lathe tool is positioned closer to the shaft. Lathe operations can be performed both automatically and manually. Details can be found in the user manual.

Once a disc or drum  is mounted right onto the shaft with the correct attachments, there will be no shaking or vibrations. Still, to minimize potential friction and vibration, vibration and noise-reducing plastic O-rings for the outer circumference of the discs and a support bracket for under the lathe tool are provided.

Our machine, which is designed for efficient and easy use, comes with a 2-year warranty. A detailed user manual is included with the machine.

General Information:

– All necessary equipment for lathe operations is provided with the machine.

– All equipment and attachments required for mounting both the drum and  the disc onto the shaft are included with the machine.

– The machine features one shaft (25mm).

– There are two separate lathe tools on the machine, one for the disc and one for the drum.

– Suitable for personal vehicles, light commercial vehicles, and minibuses.

– Practical and easy to use.

– Both sides of the discs are lathed simultaneously.

– Service and spare parts are available.

Technical Specifications:

– Maximum disc diameter: 330 mm

– Maximum disc thickness: 42 mm

– Motor: 230/400V, 50HZ, 4.95/2.85A, 1.1KW, 3-phase.

Dimensions and Weight:

– (LxWxH): 90x85x120 cm

– Weight with standard accessories and packaging: approximately 170 kg